Portable water purification devices are self-contained, easily transported units used to purify water from untreated sources (such as rivers, lakes, and wells) for drinking purposes. Their main function is to eliminate pathogens, and often also suspended solids and some unpalatable or toxic compounds.
These units provide an autonomous supply of drinking water to people without access to clean water supply services, including inhabitants of developing countries and disaster areas, military personnel, campers, hikers, and workers in wilderness, and survivalists. They are also called point-of-use water treatment systems and field water disinfection techniques.
Techniques include heat (including boiling), filtration, activated charcoal adsorption, chemical disinfection (e.g. chlorination, iodine, ozonation, etc.), ultraviolet purification (including sodis), distillation (including solar distillation), and flocculation. Often these are used in combination.
Drinking water hazards Untreated water may contain potentially pathogenic agents, including protozoa, bacteria, viruses, and some larvae of higher-order parasites such as liver flukes and roundworms. Chemical pollutants such as pesticides, heavy metals and synthetic organics may be present. Other components may affect taste, odour and general aesthetic qualities, including turbidity from soil or clay, colour from humic acid or microscopic algae, odours from certain type of bacteria, particularly Actinomycetes which produce geosmin, and saltiness from brackish or sea water.
Common metallic contaminants such as copper and lead can be treated by increasing the pH using soda ash or lime, which precipitates such metals. Careful decanting of the clear water after settlement or the use of filtration provides acceptably low levels of metals. Water contaminated by aluminium or zinc cannot be treated in this way using a strong alkali as higher pHs re-dissolve the metal salts. Salt is difficult to remove except by reverse osmosis or distillation.
Most portable treatment processes focus on mitigating human pathogens for safety and removing particulates matter, tastes and odours. Significant pathogens commonly present in the developed world include Giardia, Cryptosporidium, Shigella, hepatitis A virus, Escherichia coli, and enterovirus.Geldreich E. Drinking water microbiology—new directions toward water quality enhancement. Int J Food Microbiol 1989;9:295-312. In less developed countries there may be risks from cholera and dysentery organisms and a range of tropical enteroparasites.
Giardia lamblia and Cryptosporidium spp., both of which cause diarrhea (see giardiasis and cryptosporidiosis) are common pathogens. In backcountry areas of the United States and Canada they are sometimes present in sufficient quantity that water treatment is justified for backpackers, although this has created some controversy. (See wilderness acquired diarrhea.) In Hawaii and other tropical areas, Leptospira spp. are another possible problem.
Less commonly seen in developed countries are organisms such as Vibrio cholerae which causes cholera and various strains of Salmonella which cause typhoid and para-typhoid diseases. Pathogenic viruses may also be found in water. The larvae of flukes are particularly dangerous in area frequented by sheep, deer, or cattle. If such microscopic larvae are ingested, they can form potentially life-threatening cysts in the brain or liver. This risk extends to plants grown in or near water including the commonly eaten watercress.
In general, more human activity up stream (i.e. the larger the stream/river) the greater the potential for contamination from sewage effluent, surface runoff, or industrial pollutants. Groundwater pollution may occur from human activity (e.g. on-site sanitation systems or mining) or might be naturally occurring (e.g. from arsenic in some regions of India and Bangladesh). Water collected as far upstream as possible above all known or anticipated risks of pollution poses the lowest risk of contamination and is best suited to portable treatment methods.
Techniques
Not all techniques by themselves will mitigate all hazards. Although flocculation followed by filtration has been suggested as best practice this is rarely practicable without the ability to carefully control pH and settling conditions. Ill-advised use of alum as a flocculant can lead to unacceptable levels of aluminium in the water so treated. If water is to be stored, halogens offer extended protection.
Heat (boiling) Heat kills disease-causing micro-organisms, with higher temperatures and/or duration required for some pathogens. Sterilization of water (killing all living contaminants) is not necessary to make water safe to drink; one only needs to render enteric (intestinal) pathogens harmless. Boiling does not remove most pollutants and does not leave any residual protection.
The World Health Organization (WHO) states bringing water to rolling boil then naturally cooling is sufficient to inactivate pathogenic bacteria, viruses and protozoa.
The Centers for Disease Control and Prevention (CDC) recommends a rolling boil for 1 minute. At high elevations, though, the boiling point of water drops. At altitudes greater than boiling should continue for 3 minutes.
All bacterial pathogens are quickly killed above , therefore, although boiling is not necessary to make the water safe to drink, the time taken to heat the water to boiling is usually sufficient to reduce bacterial concentrations to safe levels.Backer, H. Water Disinfection for International and Wilderness Traveler. Clinical Infectious Diseases. (2002) 34 (3): 355-364. Available from: http://cid.oxfordjournals.org/content/34/3/355.full Encysted protozoan pathogens may require higher temperatures to remove any risk.
Boiling is not always necessary nor sometimes enough. Pasteurization where enough pathogens are killed typically occurs at 63 °C for 30 minutes or 72 °C for 15 seconds. Certain pathogens must be heated above boiling (e.g. botulismClostridium botulinum requires , most endospores require , and prions even higher). Higher temperatures may be achieved with a pressure cooker. Heat combined with ultraviolet light (UV), such as sodis method, reduces the necessary temperature and duration.
Filtration Portable pump filters are commercially available with ceramic filters that filter 5,000 to 50,000 litres per cartridge, removing pathogens down to the 0.2–0.3 micrometer (μm) range. Some also utilize activated charcoal filtering. Most filters of this kind remove most bacteria and protozoa, such as Cryptosporidium and Giardia lamblia, but not viruses except for the very largest of 0.3 μm and larger diameters, so disinfection by chemicals or ultraviolet light is still required after filtration. It is worth noting that not all bacteria are removed by 0.2 μm pump filters; for example, strands of thread-like Leptospira spp. (which can cause leptospirosis) are thin enough to pass through a 0.2 μm filter. Effective chemical additives to address shortcomings in pump filters include chlorine, chlorine dioxide, iodine, and sodium hypochlorite (bleach). There have been polymer and ceramic filters on the market that incorporated iodine post-treatment in their filter elements to kill viruses and the smaller bacteria that cannot be filtered out, but most have disappeared due to the unpleasant taste imparted to the water, as well as possible adverse health effects when iodine is ingested over protracted periods.
While the filtration elements may do an excellent job of removing most bacteria and fungi contaminants from drinking water when new, the elements themselves can become colonization sites. In recent years some filters have been enhanced by bonding silver metal nanoparticles to the ceramic element and/or to the activated charcoal to suppress growth of pathogens.
Small, hand-pumped reverse osmosis filters were originally developed for the military in the late 1980s for use as survival equipment, for example, to be included with inflatable rafts on aircraft. Civilian versions are available. Instead of using the static pressure of a water supply line to force the water through the filter, pressure is provided by a hand-operated pump. These devices can generate drinkable water from seawater.
The Portable Aqua Unit for Lifesaving ("PAUL") is a portable ultrafiltration-based membrane water filter for humanitarian aid. It allows the decentralized supply of clean water in emergency and disaster situations for about 400 persons per unit per day. The filter is designed to function with neither chemicals nor energy nor trained personnel.
Activated charcoal adsorption Granular activated carbon filtering utilizes a form of activated carbon with a high surface area, and adsorbs many compounds, including many toxic compounds. Water passing through activated carbon is commonly used in concert with hand pumped filters to address organic contamination, taste, or objectionable odors. Activated carbon filters are not usually used as the primary purification techniques of portable water purification devices, but rather as secondary means to complement another purification technique. It is most commonly implemented for pre- or post-filtering, in a separate step than ceramic filtering, in either case being implemented prior to the addition of chemical disinfectants used to control bacteria or viruses that filters cannot remove. Activated charcoal can remove chlorine from treated water, removing any residual protection remaining in the water protecting against pathogens, and should not, in general, be used without careful thought after chemical disinfection treatments in portable water purification processing. Ceramic/Carbon Core filters with a 0.5 μm or smaller pore size are excellent for removing bacteria and cysts while also removing chemicals.
Chemical disinfection with halogens Chemical disinfection with halogens, chiefly chlorine and iodine, results from oxidation of essential cellular structures and enzymes. The primary factors that determine the rate and proportion of microorganisms killed are the residual or available halogen concentration and the exposure time. Secondary factors are pathogen species, water temperature, pH, and organic contaminants. In field-water disinfection, use of concentrations of 1–16 mg/L for 10–60 min is generally effective. Of note, Cryptosporidium oocysts, likely Cyclospora species, Ascaris eggs are extremely resistant to halogens and field inactivation may not be practical with bleach and iodine.
Iodine