Continental O-170

The Continental O-170 engine is the collective military designation for a family of small aircraft engines, known under the company designation of A50, A65, A75 and A80. The line was designed and built by Continental Motors commencing in the 1940s. It was employed as the powerplant for civil and military light aircraft.Christy (1983)

The horizontally opposed, four-cylinder engines in this family are all identical in appearance, bore, stroke, dry weight, and piston displacement. All feature a bottom-mounted updraft carburetor fuel delivery system. The higher power variants differ only in compression ratio and maximum allowable rpm, plus minor modifications. The lower power versions are fully convertible to the higher rated versions.

Design and development

In all models of this family of engines the cylinder heads are of aluminum alloy, screwed and shrunk onto steel barrels. Spark plug inserts and intake valve seats are made from aluminum-bronze alloy, while the exhaust valve seats are steel. The engines all employ hydraulic tappets which operate in aluminum guides that are machined into the crankcase. The tappets are built from four parts, a cam follower body, cup, cylinder, and piston and operate with clearances of to . The pushrods are steel and feature pressed-in ball ends.

Lubricating oil is delivered under pressure from the oil sump to the drive bearings and the crankpins through the crankshaft. The cylinder walls and pistons are spray lubricated. Normal operating oil pressure is 35 psi, with minimum idle oil pressure 10 psi.

Variants

A50 , Compression ratio 5.4:1, max rpm 1,900, fuel consumption at cruise 3.8 US gph A50-1 A50-2 A50-3 A50-4 A50-5 A50-6 A50-7 A65 , Compression ratio 6.3:1, max rpm 2,300, fuel consumption at cruise 4.4 US gph. The exhaust valves have stellite faces. The pistons have three rings, although some early production A65s had four piston rings.Teledyne Continental Motors: Continental Aircraft Engine Operator's Manual, pages 4-5. Teledyne Continental Motors, FAA Approved December 1980. Continental Form No. X30012 A65-1 A65-2 A65-3 A65-4 A65-5 A65-6 A65-7 A65-8 A65-8F A65-9: A65-12 A75 , Compression ratio 6.3:1, max rpm 2,600, fuel consumption at cruise 4.8 US gph. The exhaust valves have stellite faces and the connecting rods have a hole drilled in the rod cap to improve lubrication. The pistons have three rings and smaller piston pins. A75-1 A75-2 A75-3 A75-4 A75-5 A75-6 A75-14 A80 , Compression ratio 7.55:1, max rpm 2,700, fuel consumption at cruise 5.2 US gph. The connecting rods have a hole drilled in the rod cap to improve lubrication. The pistons have five rings and smaller piston pins. A80-1 A80-2 A80-3 A80-4 A80-5 A80-6 A80-8 O-170 Military designation for the A50, A65, A75, A80 family of engines. O-170-1 O-170-3 O-170-5 O-170-7

Applications A50 Aeronca KCA Aeronca 50C Aeronca 50TC Aeronca S50C Luscombe 8 Piper J-3 Piper J-4 Porterfield CP50 Porterfield CP55 Taylorcraft BC Taylorcraft BCS

A65

A75 Bearhawk LSA Culver LCA Jodel D.121 Luscombe 8C Luscombe 8D Piper J-4E Piper J-5 Piper J-5A Porterfield 75C Rearwin Skyranger 175 Stinson Model 105 (HW-75)

A80 Harris Geodetic LW 108 Piper J-5A-80 Shirlen Big Cootie Stinson Model 105 (HW-80) Stinson Model 10 Vought V-173

Specifications (O-170-3 or A-65-8)

Continental O-170

Bron en licentie