The Holden Caprice is a full-size luxury car which was produced by Holden in Australia from 1990 to October 2017. The similar Holden Statesman, which was also introduced in 1990 as a model below the Caprice, was discontinued in September 2010. Between 1971 and 1985, Holden marketed their long-wheelbase sedans under the Statesman marque.
Statesman and Caprice are essentially long-wheelbase variants of the Commodore range, and as of 2006, were the largest rear-wheel drive sedans offered by GM. Internationally, Statesmans and Caprices have been rebadged as the Buick Royaum, Daewoo Statesman, and Chevrolet Caprice. In addition, these cars have formed the basis of the Chinese-built Buick Park Avenue and the Bitter Vero, a rebodied version from Germany.
The main difference between the Statesman and the Caprice lies within their equipment packages. Moreover, Caprices are commonly powered by V8 engines rather than V6s and, whilst modern Caprices may be mistaken as fully specified versions of the cheaper Statesman, the two were separate Holden models in the past. In appearance, Caprices can be distinguished by their unique interior and exterior trim such as the grille insert. In addition to the large V8 engine, in latter years, the Caprice suspension was often more sport-oriented (from the 2003 WK series).
Traditionally in Australia, the Statesman and Caprice have been direct rivals to the Ford Fairlane and LTD, respectively. However, Ford's decision to discontinue these models in 2007 left Holden with the Chrysler 300C as the only direct competition at pricing point occupied, at least until the launch of the Hyundai Genesis in 2015. As announced by Holden in 2014, its entire Australian production comprising the Caprice ceased in 2017.
Etymology The word "caprice" means impulsive, unpredictable or sudden condition, or series of changes or a brief romance.
Statesman (HQ–WB; 1971–1984)
Prior to the introduction of the Holden Statesman and Caprice models in 1990, Holden marketed its long-wheelbase sedan range through a separate Statesman marque, absent of all "Holden" branding.Luck (1971), p. 62.Wright (1998), p. 336. "Back in 1971 when the HQ Statesman was launched, the name Holden was not even applied. Ridiculously, GM-H's marketing people wanted to convince the public that somehow 'Statesman' was a marque rather than a model." These original vehicles, were sold through the General Motors-Holden's dealership channel, and were based on the mainstream Holden range (Belmont, Kingswood, Monaro and Premier), offering more luxury, additional length than the Holden sedan and coupe models (the Statesman shared the same wheelbase as the Holden Wagon, Utility and Panel Van), and styling to differentiate it from the smaller Holden sedans.Wright (1998), p. 209. "...although the ineffective Brougham luxury model was replaced by the Statesman, which used a longer wheelbase and featured styling that set it more clearly apart from the smaller models." The first of such cars were introduced in 1971 as the HQ series Statesman, replacing the short-lived Holden Brougham.Bebbington (1998), p. 40. "The all-new HQ series Holden was GM-H's most important new model range to date. [...] The Brougham was replaced by the all-new Statesman...". Although designed specifically for the Australian market, front end styling of the Statesman Caprice bears a strong resemblance to the 1971 North American Chevrolet Caprice. Subsequent HJ, HX and HZ models were updates to the original HQ bodywork,Bebbington (1998), p. 52. "GM-H [...] released the HZ series in October 1977, this being the fourth version of the HQ/HJ/HX body style." as was the final WB series which introduced a new six-window glasshouse.Robinson (1980), p. 25. "...the WB has gained an extra windows in the C-pillar...". WB represented the most significant update yet, with only the front doors and bonnet common with the HZ sheetmetal.Bebbington (1998), p. 56. "[WB] Statesmans were more than minor facelift of the HZ. They had virtually all-new exterior sheetmetal, with only the front doors and bonnet carrying over from their predecessors." Notwithstanding these alterations, the WB fell short of great market success, that is, until 1984 when production cessation was announced, generating a rapid sales ascent. For Holden, the decision had been made—the line's discontinuance was irreversible.Davis, Wright (1994), p. 10–11. "...the days of the big Holden were short numbered. Late in 1984 GM-H announced it was vacating the big car field... Incredibly, sales of Statesman were on the rapid ascendent when production was stopped in 1984. However, GM-H was already irreversibly locked into the decision to discontinue the model line."
First generation (1990–1999)
VQ
In March 1990, after a six-year hiatus since the WB Statesman's dismissal, demand for a long-wheelbase luxury sedan in Australia saw Holden resurrect the Statesman and Caprice names. Given the model designation VQ, these new luxury models utilised the long-wheelbase chassis taken from the VN Commodore station wagon, as opposed to the VN sedan's short-wheelbase. These VN models were in turn heavily revised and enlarged versions of the Opel Omega A.Robinson (2006), p. 26 In comparison to the regular Commodore sedan, VQs added an additional of length, and were still longer than the VN wagon.
Holden made many efforts to distinguish the Statesman from the Commodore, on which it is based. These features include a formal grille and a very different glasshouse reminiscent of contemporary GM products such as the Oldsmobile Cutlass Supreme (see image), and the rear license plate repositioned to the bumper, while incorporating the doors and headlights from the Commodore station wagon. Both Statesman and Caprice models were offered and equipped with independent rear suspension—a feature introduced one year later on high-end VP Commodores. Also in 1991, Holden introduced the VQ Series II models. The Series II Caprice ushered anti-lock brakes as standard, however it was optional on the Statesman. The Commodore's 3.8-litre 3800 V6 engine was now optional on the Statesman only, with the old 5.0-litre V8 remaining standard across the range.Jeeves (2008), p. 78–79, 134 Both powerplants were mated with a four-speed THM700R4 automatic transmission.
Holden Special Vehicles offered several different versions of the VQ Statesman and Caprice, with enhanced performance and appearance. These vehicles were designated as HSV Statesman 5000i,HSV Statesman 5000i Specifications sheet SV90 and SV93.
VR
The VR followed in March 1994, mirroring the model change of the standard VR Commodore, incorporating engineering improvements as well as sheet metal changes. The updated running gear included a new electronically controlled version of the GM 4L60-E automatic transmission, and the latest revision of the Buick 3.8-litre V6 engine. The engine now featured rolling-element bearings in the valve rocker arms, increasing compression ratios from the VQ II series engine. The revised V6 was now standard on the Statesman and available for the very first time as an option on the Caprice. These changes combined to deliver an increase in power to and further improvement in noise, vibration, and harshness levels. In terms of equipment, a driver's airbag became standard on both the Statesman and Caprice.
For the VR series, Holden no longer used separate model designations for its Statesman and Caprice. Instead, they adopted the same two-letter title as the Commodore. This same principle applied for the VS models, but not for those succeeding it.
VS
The VS, launched in April 1995, saw the introduction of the updated Ecotec (Emissions and Consumption Optimisation through TEChnology) version of the Buick V6 engine which coincided with the changes to the engine in the United States. The Ecotec engine packed 13 percent more power, an increase of over the VR. Holden mated the new engine with a modified version of the GM 4L60-E automatic transmission, bringing improved throttle response and smoother changes between gears. Series II and III revisions came in September 1996 and June 1998, mainly consisting of a more rounded rear treatment and new alloy wheel designs. The Series II also heralded the introduction of the L67 Supercharged V6. This engine slotted in between the existing V6 and V8 engines and was officially rated at , just below the V8, though a HSV option for the 5.0-litre V8 was available. A special edition Statesman International was briefly offered in October 1995 and again as a Series II in February 1997.
For the Statesman, Holden included the ten-stack CD changer from the VR Caprice as standard. A new two-stage door remote was also made standard across the range. The remote, located on the key fob allows for just the driver's door to be unlocked. Safety-wise, a passenger airbag was introduced as standard in the VS range, following the introduction of a driver's airbag on the VR series. The Used Car Safety Ratings, undertaken by the Monash University Accident Research Centre, found that first generation Statesmans (VQ–VS) provide an "average level" of occupant safety protection in the event of an accident.
HSV released the HSV Grange model in October 1996 (as part of VS II) as a sports variant of the Caprice. Manufactured at Elizabeth, South Australia, and finished by HSV at Clayton, Victoria, the Grange was available in 185i and 215i variants, powered by 5.0- and stroked 5.7-litre V8 engines, respectively. The VS Grange was the first Grange produced by HSV, having previously produced Statesman and Caprice models under its own brand. Standard features for the VS II Grange included 17-inch alloy wheels, a ten-speaker sound system with a ten-disc CD stacker, climate control air conditioning, a power adjustable driver's seat (with memory settings), leather upholstery, cruise control, front fog lights, a leather-wrapped steering wheel, remote central locking, power windows and mirrors, telescopic steering wheel adjustment, a trip computer, power sunroof, woodgrain interior trim, an alarm and immobiliser. The 215i variants were also fitted with a Hydratrak limited slip differential.
Second generation (1999–2006)
WH
The next model came in June 1999, almost two years after the launch of the all-new VT Commodore from which the new WH was initially based. The WH series saw Holden return to a standalone model designation, rather than adopting the same used by the short-wheelbase Commodore. Models followed much the same pattern as the previous car: a standard Statesman, a special edition Statesman International, and the Caprice as flagship. The doors and front windscreen were again shared with the mainstream Commodore while wheelbase was increased to . WH Series I cars built between June 1999 and October 2000 had more in common with VT II Commodore, while WH Series II cars built between October 2000 and May 2003 bore more resemblance to the updated VX Commodore in parts and finish.
Engines were as per the Commodore, so a 3.8-litre V6 Ecotec unit, a supercharged version of the same, and a new 5.7-litre Generation III V8, rated at . A Series II revision brought a power increase for the Ecotec V6 bringing it up to . Since the WH, which was engineered for both right- and left-hand drive, the Statesman has been exported to the Middle East as the Chevrolet Caprice, following the same model changes as the Holden.