A wearable computer, also known as a body-borne computer or wearable, is a computing device worn on the body.Mann, Steve (2012): Wearable Computing. In: Soegaard, Mads and Dam, Rikke Friis (eds.). "Encyclopedia of Human-Computer Interaction". Aarhus, Denmark: The Interaction-Design.org Foundation. The definition of 'wearable computer' may be narrow or broad, extending to smartphones or even ordinary wristwatches.
Wearables may be for general use, in which case they are just a particularly small example of mobile computing. Alternatively, they may be for specialized purposes such as fitness trackers. They may incorporate special sensors such as accelerometers, heart rate monitors, or on the more advanced side, electrocardiogram (ECG) and blood oxygen saturation (SpO2) monitors. Under the definition of wearable computers, we also include novel user interfaces such as Google Glass, an optical head-mounted display controlled by gestures. It may be that specialized wearables will evolve into general all-in-one devices, as happened with the convergence of PDAs and mobile phones into smartphones.
Wearables are typically worn on the wrist (e.g. fitness trackers), hung from the neck (like a necklace), strapped to the arm or leg (electronic tagging), or on the head (as glasses or a helmet), though some have been located elsewhere (e.g. on a finger or in a shoe). Devices carried in a pocket or bag – such as smartphones and before them, pocket calculators and PDAs, may or may not be regarded as 'worn'.
Wearable computers have various technical issues common to other mobile computing, such as batteries, heat dissipation, software architectures, Wireless and personal area networks, and data management. Many wearable computers are active all the time, e.g. processing or recording data continuously.
Applications
Wearable computers are not only limited to computers such as fitness trackers that are worn on wrists; they also include wearables such as heart pacemakers and other prosthetics. They are used most often in research that focuses on behavioral modeling, health monitoring systems, IT and media development, where the person wearing the computer actually moves or is otherwise engaged with his or her surroundings. Wearable computers have been used for the following:
general-purpose computing (e.g. smartphones and smartwatches) sensory integration, e.g. to help people see better or understand the world better (whether in task-specific applications like camera-based welding helmets or for everyday use like Google Glass) behavioral modeling health care monitoring systems service management electronic textiles and fashion design, e.g. Microsoft's 2011 prototype "The Printing Dress".Microsoft, (3 August 2011), Dressing for the Future: Microsoft Duo Breaks Through with Wearable Technology Concept, Microsoft News Center
Wearable computing is the subject of active research, especially the form-factor and location on the body, with areas of study including user interface design, augmented reality, and pattern recognition. The use of wearables for specific applications, for compensating disabilities or supporting elderly people steadily increases.
Operating systems The dominant operating systems for wearable computing are:
FreeRTOS is a real-time operating system kernel for embedded devices; most of the Smartbands that are currently available in the market are based on FreeRTOS, which include Huawei, Honor, Lenovo, realme, TCL and Xiaomi smartbands. LiteOS is a lightweight open source real-time operating system that is part of Huawei's "1+8+N" Internet of Things solution. Tizen OS from Samsung (there was an announcement in May 2021 that Wear OS and Tizen OS will merge and will be called simply Wear.) watchOS is a proprietary mobile operating system developed by Apple Inc. to run on the Apple Watch. Wear OS (previously known as Android Wear) is a smartwatch operating system developed by Google Inc.
History
Due to the varied definitions of wearable and computer, the first wearable computer could be as early as the first abacus on a necklace, a 16th-century abacus ring, a wristwatch and 'finger-watch' owned by Queen Elizabeth I of England, or the covert timing devices hidden in shoes to cheat at roulette by Thorp and Shannon in the 1960s and 1970s.
However, a general-purpose computer is not merely a time-keeping or calculating device, but rather a user-programmable item for arbitrary complex algorithms, interfacing, and data management. By this definition, the wearable computer was invented by Steve Mann, in the late 1970s:
The development of wearable items has taken several steps of miniaturization from discrete electronics over hybrid designs to fully integrated designs, where just one processor chip, a battery, and some interface conditioning items make the whole unit.
1500s Queen Elizabeth I of England received a watch from Robert Dudley in 1571, as a New Year's present; it may have been worn on the forearm rather than the wrist. She also possessed a 'finger-watch' set in a ring, with an alarm that prodded her finger.David Boettcher, "The "Invention" of the Wristwatch", Eur Ing David Boettcher, April 2015
1600s The Qing dynasty saw the introduction of a fully functional abacus on a ring, which could be used while it was being worn.
1960s In 1961, mathematicians Edward O. Thorp and Claude Shannon built some computerized timing devices to help them win a game of roulette. One such timer was concealed in a shoe and another in a pack of cigarettes. Various versions of this apparatus were built in the 1960s and 1970s.
Thorp refers to himself as the inventor of the first "wearable computer". In other variations, the system was a concealed cigarette-pack-sized analog computer designed to predict the motion of roulette wheels. A data-taker would use microswitches hidden in his shoes to indicate the speed of the roulette wheel, and the computer would indicate an octant of the roulette wheel to bet on by sending musical tones via radio to a miniature speaker hidden in a collaborator's ear canal. The system was successfully tested in Las Vegas in June 1961, but hardware issues with the speaker wires prevented it from being used beyond test runs.Raseana.k.a shigady, Beat the Dealer, 2nd Edition, Vintage, New York, 1966. This was not a wearable computer because it could not be re-purposed during use; rather it was an example of task-specific hardware. This work was kept secret until it was first mentioned in Thorp's book Beat the Dealer (revised ed.) in 1966 and later published in detail in 1969.
1970s Pocket calculators became mass-market devices in 1970, starting in Japan. Programmable calculators followed in the late 1970s, being somewhat more general-purpose computers. The HP-01 algebraic calculator watch by Hewlett-Packard was released in 1977.Andre F. Marion, Edward A. Heinsen, Robert Chin, and Bennie E. Helmso, wrist instrument Opens New Dimension in Personal Information "Wrist instrument opens new dimension in personal information", Hewlett-Packard Journal, December 1977. See also HP-01 wrist instrument, 1977.
A camera-to-tactile vest for the blind, launched by C.C. Collins in 1977, converted images into a 1024-point, ten-inch square tactile grid on a vest.C.C. Collins, L.A. Scadden, and A.B. Alden, "Mobile Studies with a Tactile Imaging Device," Fourth Conference on Systems & Devices for the Disabled, 1–3 June 1977, Seattle WA.
1980s The 1980s saw the rise of more general-purpose wearable computers. In 1981, Steve Mann designed and built a backpack-mounted 6502-based wearable multimedia computer with text, graphics, and multimedia capability, as well as video capability (cameras and other photographic systems). Mann went on to be an early and active researcher in the wearables field, especially known for his 1994 creation of the Wearable Wireless Webcam, the first example of lifelogging.
Seiko Epson released the RC-20 Wrist Computer in 1984. It was an early smartwatch, powered by a computer on a chip.Japanese PCs (1984) (14:05), Computer Chronicles
In 1989, Reflection Technology marketed the Private Eye head-mounted display, which scans a vertical array of LEDs across the visual field using a vibrating mirror. This display gave rise to several hobbyist and research wearables, including Gerald "Chip" Maguire's IBM/Columbia University Student Electronic Notebook,J. Peter Bade, G.Q. Maguire Jr., and David F. Bantz, The IBM/Columbia Student Electronic Notebook Project, IBM, T. J. Watson Research Lab., Yorktown Heights, NY, 29 June 1990. (The work was first shown at the DARPA Workshop on Personal Computer Systems, Washington, D.C., 18 January 1990.) Doug Platt's Hip-PC, and Carnegie Mellon University's VuMan 1 in 1991.
The Student Electronic Notebook consisted of the Private Eye, Toshiba diskless AIX notebook computers (prototypes), a stylus based input system and a virtual keyboard. It used direct-sequence spread spectrum radio links to provide all the usual TCP/IP based services, including NFS mounted file systems and X11, which all ran in the Andrew Project environment.
The Hip-PC included an Agenda palmtop used as a chording keyboard attached to the belt and a 1.44 megabyte floppy drive. Later versions incorporated additional equipment from Park Engineering. The system debuted at "The Lap and Palmtop Expo" on 16 April 1991.
VuMan 1 was developed as part of a Summer-term course at Carnegie Mellon's Engineering Design Research Center, and was intended for viewing house blueprints. Input was through a three-button unit worn on the belt, and output was through Reflection Tech's Private Eye. The CPU was an 8 MHz 80188 processor with 0.5 MB ROM.
1990s In the 1990s PDAs became widely used, and in 1999 were combined with mobile phones in Japan to produce the first mass-market smartphone.
In 1993, the Private Eye was used in Thad Starner's wearable, based on Doug Platt's system and built from a kit from Park Enterprises, a Private Eye display on loan from Devon Sean McCullough, and the Twiddler chording keyboard made by Handykey. Many iterations later this system became the MIT "Tin Lizzy" wearable computer design, and Starner went on to become one of the founders of MIT's wearable computing project. 1993 also saw Columbia University's augmented-reality system known as KARMA (Knowledge-based Augmented Reality for Maintenance Assistance). Users would wear a Private Eye display over one eye, giving an overlay effect when the real world was viewed with both eyes open. KARMA would overlay wireframe schematics and maintenance instructions on top of whatever was being repaired. For example, graphical wireframes on top of a laser printer would explain how to change the paper tray. The system used sensors attached to objects in the physical world to determine their locations, and the entire system ran tethered from a desktop computer.